01865 300252
Call us: 01865 300252

How to Lay Porcelain Slabs

Low section man cementing paving stone

Porcelain paving has become one of the most stylish and versatile options for outdoor spaces, thanks to its smooth surface, wide range of colours and finishes, and remarkable durability. However, the very qualities that make porcelain so attractive also demand that it be precisely laid. If the joints aren’t correctly filled or the panels aren’t supported on a stable, level bed, even the highest‑quality slabs can crack or shift over time, putting your investment at risk.

This guide breaks down how to lay porcelain paving into clear, actionable steps so you can achieve a beautiful, durable patio with confidence.

If you have any questions that this article doesn’t answer, please feel free to contact us today!

 

Why Choose Porcelain Paving for Your Garden Path, Patio, or Driveway?

kandla grey porcelain
Kandla Grey Porcelain

There are several benefits to porcelain paving, including:

  • Exceptional Durability & Practicality: Porcelain slabs are fired at very high temperatures, creating an ultra‑dense material that resists cracking and chipping, even under constant foot traffic or heavy garden furniture.
  • Highly Slip Resistant: Many porcelain ranges, including Minster Paving’s collection, achieve an R11 slip rating, making them safe to use around pools, on steps, or in any area prone to moisture.
  • Resistant to Moss, Algae, and Mould: The non‑porous surface of porcelain minimises water absorption and prevents organic growth.
  • Easy to Maintain and Clean: Routine sweeping and an occasional wash with porcelain cleaner are all that’s needed to keep porcelain looking pristine.
  • Wide Choice of Colours and Styles: Porcelain paving offers a versatile palette to complement any garden design, including shades of grey, beige, off-white, and charcoal.

 

Tools Needed to Lay Porcelain Slabs

  • String Lines/Pegs
  • Tape Measure
  • Spirit Level
  • Safety Glasses
  • Dust Mask
  • Wide Paintbrush
  • Shovel
  • Trowel
  • Rake
  • Mixer
  • Wheelbarrow
  • Wet-Saw With Diamond Blade
  • Plate Compactor
  • Bucket
  • Rubber Mallet

 

Materials Needed

 

How to Lay Porcelain Slabs – Step-By-Step

Here’s the typical process for laying porcelain slabs in your garden:

1. Prepare the Base

Mark out the area to be excavated using string lines and pegs. Excavate your patio area to a depth of around 150 mm (6”), removing all topsoil, roots and other vegetation. Make sure the edges are straight and the overall surface slopes slightly (about 1 to 2°) for proper water run‑off.

2. Lay the Sub-Base

Spread a roughly 100mm layer of crushed stone or MOT type 1 sub‑base. Use a rake to level it, then compact thoroughly with a plate compactor to create a firm, stable foundation.

3. Mix the Mortar Bed

In a wheelbarrow, combine four parts sharp sand to one part cement with clean water until you achieve a firm but workable consistency – it should not be runny. Mix thoroughly throughout the day to avoid dry pockets.

4. Apply the Porcelain Primer

Carefully flip your first porcelain paving slab so that the reverse is upwards. Using a wide paintbrush, apply the priming slurry to the underside of the slab until you’ve achieved an even coating.

5. Lay a Full Bed of Mortar

Using either a shovel or a towel, spread the mortar on the sub-base so that it is full with no voids (gaps), and level it out (but ensure there’s about a 1 to 2° slope for drainage). Some guides may recommend that you do this before applying the primer; however, this runs the risk of the mortar base drying out too quickly.

6. Place Down Your First Porcelain Slab

Place your first porcelain paving slab onto the wet bed of mortar, ensuring it has been properly primed as outlined in step 4. Gently press it down, tap it with a rubber mallet, and use a spirit level to ensure it has the correct slight slope away from your property.

7. Repeat for Each Slab

Repeat the previous step for each porcelain tile, laying them in a straight line from the edge of your excavated area. To ensure you’ve got even spacing between each slab (approximately 5mm), you can use either tile spacers or 5mm plywood. Once you’ve reached the end of the row, you may need to cut the end slab to ensure it fits – we’ll explain how to do this later on.

8. Jointing the Slabs

Rapidflow
Use a jointing compound to fill in the gaps between each slab; always follow the manufacturer’s instructions, as each jointing compound is different. We’d recommend using a brush-in porcelain grout, such as ProJoint Rapidflow, as this delivers a weed-free, frost-resistant joint without staining the paving. Leave the slabs to dry for a minimum of 24 hours before placing furniture or walking on them.

 

How to Cut Porcelain Slabs

Here are some simple tips for cutting porcelain slabs. However, if you’re going to cut your porcelain pavers yourself, we strongly recommend reading our “How to Cut Paving Slabs” guide.

  1. Measure and mark your cut line with a pencil or chalk.
  2. Support the slab on a stable surface, e.g. with timber blocks, and clamp it in place.
  3. Using a wet‑cut diamond‑blade tile saw, proceed slowly and steadily along the line, applying light pressure to avoid chipping.
  4. Ensure you keep the blade wet to reduce dust and prevent overheating.
  5. Once cut, smooth any rough edges with a sanding stone before laying.

 

Top Tips for Maintaining Your Porcelain Paving

Using a plastic floor scrubber to scrub the tile floor with a floor cleaner If you want to protect your investment and help it last longer, follow these expert top tips!

  • Sweep regularly to remove dirt, preventing it from building up in joints.
  • Wash down the paving with a hose or pressure washer on the lowest setting.
  • Use mild detergent and a soft brush for stubborn stains; avoid acidic/abrasive cleaners.
  • Top up jointing compound or grout annually to keep joints stable and weed‑free.
  • Inspect for damage and replace cracked or chipped paving slabs promptly.
  • Avoid metal scrapers or stiff wire brushes that can scratch the porcelain surface.

 

For Beautiful Porcelain Paving Slabs, Choose Minster Paving

Are you looking for stylish, long-lasting porcelain paving? If so, we don’t blame you; it’s a great choice for all kinds of properties, and at Minster Paving, we stock the very best! Featuring an excellent slip resistance of R11, and a wide range of colours and styles to choose from, we’re your one-stop shop for a new paving patio, driveway, or pathway.  If you’ve got any questions about our products or how to lay porcelain slabs, please don’t hesitate to contact us. Similarly, visit our Oxfordshire-based showroom to see our stock in person and take home a sample before you buy.

 


 

FAQs

No, porcelain is non-porous and therefore does not need to be sealed. Instead, gentle cleaning and an annual top-up of jointing sand or grout is usually sufficient to keep the paving looking great for longer. 

20mm thick porcelain paving should be suitable for the majority of outdoor applications, including patios or garden pathways. However, for driveways, it is recommended to choose thicker porcelain slabs; approximately 30mm should suffice.

It is recommended to leave approximately 5mm between each paving slab for jointing. 

No, porcelain paving requires a fully prepared sub‑base and mortar bed to prevent movement, cracking, and unevenness.

Yes, porcelain paving can be laid on either existing concrete slabs or on a concrete surface, as long as it is in good condition. However, if the concrete is damaged, this may cause stability issues when laying your new porcelain slabs.

You should wait for at least 24 hours before walking on your new porcelain patio, as the mortar and jointing compound need to properly dry. Walking on the slabs too soon could cause them to shift and dry incorrectly. 

Porcelain is an easy-to-clean material, but you will likely encounter the occasional stubborn stain. Following our guide for cleaning porcelain paving, use a soft-bristled brush with warm water and a mild detergent. If you insist on using a pressure washer, use the lowest setting. Avoid using acidic cleaners – spot test your cleaning solution first, if in doubt. 

The cost of porcelain depends on the size of the pack and the type of porcelain paving. For example, a single tile of our Amalfi porcelain will start at £10.80, whereas a pack of our mixed-size Raj porcelain paving, covering a patio area of 21.06 m2, will cost you £606.53. Therefore, it is important to plan the total area that will be covered against the budget you have to work with.

More To Explore