Description
What Is MOT Type 1?
MOT Type 1 is the standard sub-base used across the UK for patios, driveways, paths and shed bases. The name comes from the original Ministry of Transport specification, and it’s now graded to Clause 803 of the Specification for Highway Works.
It’s crushed stone graded from 40mm down to dust. When compacted, the fine particles fill the gaps between the larger stones, creating a dense, load-bearing layer rather than loose stone that shifts underfoot.
How Deep Should It Be?
For most patios and paths, lay a compacted depth of around 100mm. Driveways and areas taking vehicle weight need around 150mm, compacted in layers of no more than 75mm at a time. Soft or clay ground may need more.
Using MOT Type 1 Under Artificial Grass
MOT Type 1 makes a firm, level base for artificial grass. Compact it to 50 to 75mm, then add a thin layer of sharp sand to smooth the surface. Artificial grass shows every dip underneath it, so a well-compacted base matters.
Not sure how much you need? Use the gravel calculator below, or call us on 01865 300252 and we’ll help you get the quantity right before you order.
FAQs
Is MOT Type 1 the same as hardcore?
No. Hardcore is a loose term for mixed crushed concrete, brick and stone. MOT Type 1 is a quarried, graded material that gives a more consistent result, which is why it’s specified for most patio and driveway sub-bases.
Is MOT Type 1 permeable?
No. The fines that make it compact so well also limit drainage. For permeable paving or a free-draining base, use MOT Type 3 instead.
Can I use MOT Type 1 under sleepers?
Yes. A compacted MOT Type 1 base gives sleeper edging and low walls a firm, level footing. Browse our reclaimed railway sleepers.
Should I keep it covered before laying?
If it’ll sit for more than a few days, cover it, especially if rain is forecast. It can be laid slightly damp, but very wet material is harder to compact.

Gravel Calculator
Reviews
There are no reviews yet.